Water damage on walls is not a good experience for any homeowner. Moisture on your walls makes them look undesirable and can compromise the house’s structural integrity.

When water damage happens to your walls, you need to know how to deal with the situation. Most times, it is more severe than anticipated, and you may need to call the services of an emergency plumber. Other times, it is not very severe and may require a little DIY project to save your walls.

In this short guide, we will go through 7 steps to fix water damage on your walls if this unfortunate incident happens to you.

Steps to Fixing Water Damage on Your Walls

Here are some quick action steps you can take to fix water damage on your walls:

1. Find the Source of the Leak

Most of your work to fix water damage on your walls would be useless if you don’t find the source of the damage in the first place. So check all the usual places, plumbing leaks, windows, doors, etc.

2. Clean up the Wet Area as Much as Possible

Start by draining the wet area of all moisture. You can do this using a towel or a vacuum dryer. Depending on the kind of wall, you can also use soap to clean the area and make it look better.

3. Remove Flaking and Bubbling

Flaking and Bubbling can happen to drywall and paint. Sometimes, a bubbling wall contains some amount of moisture. Burst the bubble and scrape it off the wall.

One critical practice is to put pieces of cloth on the floor around the affected area. This way, scraped pieces of drywall and paint can fall on the cloth and make it easier for you to clean up.

4. Add a seal binder

A seal binder acts like glue to block all the porous surfaces of the wall from receiving more water. As a result, the surface becomes solid so that you can apply paint to it. When you add it, wait about an hour for it to dry.

5. Apply Some Filler

Filler makes the wall ready for painting. Remember, these steps are heavily dependent on the source of the water damage, the extent of the damage, and the kind of wall you have. Sometimes, you may have to replace the wall depending on the extent of the damage

6. Prepare the Wall for Painting

You can add a water-based sealer and sand the surface to prepare it for painting. Ensure you give the filler up to a day to dry properly before you do any of these.

7. Paint the Wall

Now that you have successfully cleaned and prepared the wall for painting, it is time to paint the wall. Painting the wall will beautify the wall

Conclusion

If your wall gets damaged by an emergency flood, rain, plumbing leaks, or other unforeseen circumstances, you don’t have to get worried about it. With the tips in this guide, you can quickly get your wall in shape.

If the problem is more complex than something you can fix, you may need to enlist the services of a professional. Professionals will help you identify the leak and fix the water damage to your wall.