|

Share on facebook
Share on twitter

How clean is the water running through your taps in the house and business premises? How often do you get the backflow tested to be sure it’s safe for use?

Backflow refers to the unwanted or contaminated water that flows in the opposite direction of your plumbing system. This occurs at a point in your water system where the water supply is connected to other water sources that are not potable or healthy.

This situation can pose a problem and health threat for you if unnoticed or unattended. The water you would otherwise drink or cook with will become contaminated with wastewater without your knowing it. It also poses other damages to your pipes and your water system in general.

What Causes Backflow?

There are numerous reasons why a backflow can happen in your home, but the two major culprits are backpressure and back-siphonage.

Backpressure occurs when the pressure in pipes pushes fluids and gas in the opposite direction where the pressure is lower. This occurrence can happen due to an increase in boiler temperature, lack of enough vents in water heaters, etc. A typical example of how this occurs is what you have when you blow air through a straw and into your drink. The bubbles you see are a result of the movement of air in the opposite direction.

Back siphonage, on the other hand, is the opposite of backpressure. In this case, water or gas is pushed back into the plumbing system as pressure drops in the pipes. When this happens, harmful fluids or water can be made into the water system, contaminating it in the process.

Backflow Testing

Backflow testing is the process of checking that the water flowing in your pipes is not contaminated and that it isflowing in the right direction. Professional plumbers perform this test to ensure that the water in your home runs at the normal pressure and that flow from one part of the house to the other is at the required standards.

Can Backflow be prevented?

Yes. You can be pragmatic and get ahead of backflow by preventing it before it occurs. Backflow can be controlled in two key ways;

  • Air Gap: Using an air gap by leaving space between where water is collected and your plumbing systems such as valves and faucets is one way of preventing backflow.

  • Preventer Valve: You can also prevent backflow by the use of a preventer valve. This device is set up at different locations in your plumbing system to prevent contamination from entering the water or system. Sometimes, you cannot be careful enough, and even when a backflow prevention system is set up, backflow can still happen. In these situations, you should let the professionals conduct a backflow test and restore the normalcy of your plumbing system.

Sometimes, you cannot be careful enough, and even when a backflow prevention system is set up, backflow can still happen. In these situations, you should let the professionals conduct a backflow test and restore the normalcy of your plumbing system.

How Significant is Backflow Testing?

Now that you know the harmful effects of backflow, you must have a backflow test conducted in your home every year by professionals. Whenever water runs backward or in the opposite direction, the water becomes contaminated and unhygienic for drinking or cooking.

Because of the uncertainty of when a backflow could happen, you must keep in touch with plumbing professionals to carry out a backflow test for you.

If you live in Syracuse, Pittsburgh, Providence, and other parts of America, you can contact our professional plumbers to conduct a backflow test for you. We provide additional plumbing services, including detecting leaks, installing water appliances, drain cleaning, repairs, and other plumbing services. With our wealth of experience, we guarantee the best services and results for your homes.

home services blog

About Us

Privacy policy

HELP & SUPPORT

FAQs

Contact

 

Follow us

Facebook

Twitter

Don't miss a thing