Share on facebook
Share on twitter

Crucial Steps Homeowners Must Take When Dealing With Broken Water Heaters

Whether it is located in the basement or a separate room, broken water heaters can cause stress. A standard unit holds 80 gallons, so an overnight leak will lead to a flood. This results in major property damage with soaked walls and floors. Besides, having no hot water supply is also troublesome. If you are dealing with these issues, take note of the following:

Shut Off Power Source 

Before calling the plumber, shut off a gas water heater by turning the temperature dial. This is usually located at the top of the thermostat. If you have a model that runs on electric power, switch off the circuit breaker. This will prevent electrocution, especially if there is a leak as water is a conductor. Typically, the heating element shuts off when the water hits a specific temperature. But with a broken tank, it may malfunction. Cutting it off assures you stay safe.

Cut Off the Cold Water Supply

Cut off the tanks tap water supply from the source. This goes from your main water line into the tank. When your tank is in good condition, the cold water stops filling up when the tank is full. But since it is leaking, the water will continue to flow. Close the valve found at the top of the heater. Rotate this clockwise to shut it off. If you cannot find it or reach it, you must turn off that main water supply line outside your property.

Call the Plumber

After doing the first two safety steps, you must call your plumber to come right away to fix a ruptured water heater. However, remember that your unit will not just conk out dramatically overnight. There are usually signs that your aging water heater has sediment buildup in the interior. Take note of the following:

            • Rusty water coming from the hot water tap
            • Weird noises from within that show sedimentation
            • Leaking connections
            • Pooled water under the tank due to tiny pinholes

Don’t wait for major flooding to call the plumber. By then, you will have to spend more to restore your property. Instead, as soon as you spot these signs, have a professional come to inspect your water heater thank. Typically, water heaters have a lifespan of about 8 to 12 years. With regular inspection and maintenance, you can prolong its life.

Clean Up Property

After calling the plumber, document damage by taking notes and pictures so you can claim your homeowner’s insurance. From there, start the immediate cleanup. Take out any important belongings to prevent further soaking. Then, remove any standing water to prevent mold and mildew growth. If you have a submersible water pump, use that to drain the water. Otherwise, the conventional bucket method will also work. Try to mop out everything, including baseboards and walls. If you have an electric fan and dehumidifier, keep them running to keep air circulating. This will help deter mold growth.

Remember, if you notice any issues with your water heater, call the pros right away. You cannot take this problem lightly because a faulty thermostat can raise water temp to a dangerously high level, leading to accidental burns. A damaged heater pressure relief valve can also cause an explosion. For best results, get an annual check so your unit gets inspected, cleaned, drained, and refilled, assuring optimal performance. We service several cities in California.Please see service locations: Mountain View, Palo Alto, Santa Monica, Whittier, Buena Park, San Pedro, Alhambra, San Clemente.

home services blog


Follow us



Don't miss a thing